Jump to content


prawnstar

Member Since 29 May 2013
Offline Last Active Sep 21 2014 05:50 PM
-----

Posts I've Made

In Topic: Rev Pro "No snag" Handles

01 August 2013 - 12:16 PM

It is done :)

Had to make the opening a fraction larger to get the blue ones in.

Happy now

In Topic: Rev Pro "No snag" Handles

27 July 2013 - 03:19 PM

don't worry I've found the burr several times already :)

In Topic: Rev Pro "No snag" Handles

27 July 2013 - 03:07 AM

Use the Blue Plugs and an 8G 35mm Bugle head screw. Get stainless if you can or the "gold" ones will do. Bevel the end you tap in. Leave the end proud 2-3 mm. I've done a few sets.


Where'd you get the blue ones from? Bunnings only have the Ramset brand

In Topic: Rev Pro "No snag" Handles

26 July 2013 - 11:24 PM

they do make them in various sizes etc

 

http://www.ramset.co...n-Frame-Anchors

 

http://www.ramset.co...n-Drive-Anchors

 

are the two im looking at

 

by the measurements on the blue ones, i think i need the 7mm  size in the orange ramset - the blue dimensions are 6.35mm x 30 mm....... might need a decent tap on the head to get them in there


In Topic: Rev Pro "No snag" Handles

26 July 2013 - 07:56 PM

@watty  - what size plastic plugs are you using in the handles? 

 

ive tried a couple of different ones and have found that they pop out a fraction from the handle end, once installed....

 

thanks