Jump to content


Jynx

Member Since 06 Nov 2008
Offline Last Active Yesterday, 12:59 PM
*****

Topics I've Started

Tool for nasty sand-clogged spars

04 November 2012 - 02:58 PM

Just a simple too that I've found to work well for nasty sand-clogged Rev vertical spars.

Though this only works on the uprights, and only when you have at least one end of the spar free... Simply slide the free spar through the hole to the opposite end-cap and push... it frees-up the clogged spar from the end-cap quite easily.

Just a 5/16"+ hole drilled in a scrap piece of oak... couldn't be any simpler!

Posted Image