Jump to content


Member Since 28 Nov 2007
Offline Last Active May 04 2008 04:36 AM

Posts I've Made

In Topic: exp bridle

06 April 2008 - 06:17 AM

Hang on just taken a picture. Not sure if it helps much. Bit out of focus, sorry.


The arched line is the longer one which I thin is both ends and centre of leading edge.

The line it sort of loops through I think is top and bottom of verticals.

that DID help, thanx!
I just want to make sure it's right...
don't want to have to replace the leading edge rods (again!) this soon into the season

In Topic: exp bridle

04 April 2008 - 09:40 AM

I have essentially the same problem - I bought an EXP replacement bridle, no instructions either...
the bridle came in 3 segments (One horizontal and 2 vertical pieces)
I managed to fumble my way thru connecting all the horizontal, and the ends of the 2 vertical lines, but somewhere along the line, I'm having trouble figuring out how to connect the vertical pieces to the horizontal pieces...

there is a knot/loop near the top of the verticals, and I ***think*** it's supposed to slip over the tow-points for the upper lines, but from there, I'm not sure...

any help, pics, etc would be really appreciated!