- Revolution Forum
- → Viewing Profile: Posts: Heino
Community Stats
- Group Forum Member
- Active Posts 60
- Profile Views 1,728
- Member Title Occasional Poster
- Age 33 years old
- Birthday July 7, 1979
-
Gender
Male
-
Location
Denmark, billund
-
Interests
Photography, kites and RC cars
-
Favorite Kites
Revolutions model: Signature Series - John Barresi
Posts I've Made
In Topic: New favorite rev
24 September 2008 - 09:45 AM
BTW: the 20 anno. looks realy cool in the sunset, the white realy is shiny..
In Topic: Global Rev Count.
22 September 2008 - 12:25 AM
B-Series
B-Series ventet
20 ann rev
Rev I lee sedgwick
Rev II
Rev Sle 1.5
Shockwave
7 revs total
In Topic: Sedgwick pressision
17 September 2008 - 12:25 PM
I think you need to have a talk with the dealer you ordered your REV from. Make some kind of deal with them as they did send you the wrong LE.
The SLE frame on a REV I is quite good for those strong winds, in particular what you find in Fano and Romo. It keeps the sail flatter thus there is less pull. The stiffer the rod, the less billow you will get in the sail, thus the SLE standard and the STIFF 6-wrap(which are rare and available only on special oder) would be an ideal choice in strong winds. Of course a vented REV would be a better choice, but if you don't have one go for stiffer rods if you have them in strong winds.
i have a vented b-series..
I want to fly the rev one in low wind, as i have read somethere, the rev 1 good for this and i slow and pressise
In Topic: Sedgwick pressision
17 September 2008 - 10:31 AM
Big difference in my opinion. I'd see if you can change it to a small diameter leading edge - perhaps one of the elusive Race Rods for the Rev 1
I dont have another leading edge. I will have to ordre one, i just want to get the right one
In Topic: Show me your kitebag
15 September 2008 - 10:07 PM
- Revolution Forum
- → Viewing Profile: Posts: Heino
- Privacy Policy
- FORUM RULES ·





Find content



