bake

So when do we use the race rods that came ith it, light or heavy winds

I am unsure of what you mean by top and bottom.... But I will answer to the best of my ability.

The three rods that connect together to form the leading edge should go into the leading edge pocket, and connect to the end caps on either side. This is the same on every Revolution kite aside from the UFO.

The vertical rods should be on the back of the sail (i.e the side of the sail where the "Revolution" logo is backwards). This is the same on every Revolution kite aside from the UFO. I am guessing that you are concerned with the vertical rods, and that the "top" is the side of the sail with the "Revolution" logo readable, and the "bottom" is the side of the sail where the "Revolution" logo is backwards. If this is the case, you may want to rethink your setup on the SLE and the EXP as well. For reference, the back of the sail (i.e the side of the sail where the "Revolution" logo is backwards) is the side that should be facing away from you during flight.

Ya ....I confuse myself sometimes,

I had the verticle rods on the side where revolution would be backwards or the opposite side of the bridle... just like my other kites. Looks like I guessed right.

What kite is at the 0.57 mark.... looks like a Rev knock off?

Great point Watty.

ditto, possibly I wouldn't have done the obvious

Nicely done Joe!