exp with shockwave frame?
#1
Posted 22 November 2009 - 02:13 PM
i noticed the frame is more thicker then the exp.
i was flying is strong wind today and the exp center rod broke.
sorry if my english is not so good
#2
Posted 22 November 2009 - 03:04 PM
Welcome to the REV Forum!hey i am new to rev flying and i want to know if its possible to fit my exp rev with the frame of my shockwave.
i noticed the frame is more thicker then the exp.
i was flying is strong wind today and the exp center rod broke.
sorry if my english is not so good
There is a frame for the EXP which has the thicker rods. It is called the SLE frame. It is just for the leading edge.
You might find someone on this forum that will send you their old SLE rods really cheap as most do not like the frame.
For the EXP there are a number of different frames available. The EXP can use the same frame as all of the REV 1.5 series.
Your EXP frame is unmarked, or should be. These are the Ultra Light 3 wrap rods. There are also 2 wrap for much lighter winds and 4 wrap for very strong winds.
There is also the race rod frame which has, basically speaking, the best of the 2 and 3 wrap frames plus some. It is expensive.
If you search around on this forum you will find all the information you ever wanted to know about the different Revolution Rods.
Long John (formerly Mr. R)
STACK International Executive Committee - 6/1996-6/2008
International Rules Book Committee and STACK International Head Judge - 6/2004-6/2008
World Sport Kite Championship Judge - 2004-2005-2006(Chief Judge)
13x 1st - 12x 2nd - 6x 3rd places in 37 overall Quadline individual competitions
NEWLY REVISED Web Site - http://www.johnnmitchell.com Check it out today!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
















