B.series sail only?
#1
Posted 23 March 2009 - 09:02 AM
I thought i would only need a vtd sail so i could still fly my dual line in lower wind. But now i try to fly my vtd in like 1-3 mph wind, its fun to run backward, its a nice training and i'm getting tired of pumping the living hell out of the kite to let it in the air.... so i think its time for me to get a solid sail!
Possible from revolution kites?
thanks
#2
Posted 23 March 2009 - 09:28 AM
Contact Ben directly at Revolution. I do believe he can help you out. If not available ask for Lollie.hi, is it possible to buy just a sail? I already own a b.series vtd with a race frame, 3 wrap and 4 wrap. I would like to get just a std b.series sail... since i dont need another frame or handle.
I thought i would only need a vtd sail so i could still fly my dual line in lower wind. But now i try to fly my vtd in like 1-3 mph wind, its fun to run backward, its a nice training and i'm getting tired of pumping the living hell out of the kite to let it in the air.... so i think its time for me to get a solid sail!
Possible from revolution kites?
thanks
Long John (formerly Mr. R)
STACK International Executive Committee - 6/1996-6/2008
International Rules Book Committee and STACK International Head Judge - 6/2004-6/2008
World Sport Kite Championship Judge - 2004-2005-2006(Chief Judge)
13x 1st - 12x 2nd - 6x 3rd places in 37 overall Quadline individual competitions
NEWLY REVISED Web Site - http://www.johnnmitchell.com Check it out today!
#3
Posted 23 March 2009 - 09:46 AM
#4
Posted 24 March 2009 - 05:45 AM
Jim
Sky Jewels Kites
#5
Posted 24 March 2009 - 08:01 AM
John Barresi
kitelife.com | learnkites.com | teamiquad.com | flyform.us
kitemap.org | youtube.com/kitelife | facebook.com/kitelife
My full list of articles - www.kitelife.com/author/john-barresi
President - American Kitefliers Association
We cannot direct the wind, but we can adjust the sails."
(found in a fortune cookie)
#6
Posted 24 March 2009 - 09:49 AM
The ongoing theme here is that you can order pretty much anything from Rev through your local (or preferred) shop.
Yep!
Lolly and Ben are on my speed dial.....
The Kite Shoppe - Vancouver, WA USA (by Portland, Oregon)
Co-Sponsor of iQuad! Love you guys!!
#7
Posted 24 March 2009 - 10:07 AM
Best to support them whenever possible!
John Barresi
kitelife.com | learnkites.com | teamiquad.com | flyform.us
kitemap.org | youtube.com/kitelife | facebook.com/kitelife
My full list of articles - www.kitelife.com/author/john-barresi
President - American Kitefliers Association
We cannot direct the wind, but we can adjust the sails."
(found in a fortune cookie)
#8
Posted 24 March 2009 - 11:34 AM
I have order several masterpiece kites with the SUL leading edge sleeve, heck the most recent acquisition is for a Hampton Masterpiece with a double vent cut into each half of the wing!
You can get whatever your little heart (and wallet!) desires, it's only a phone call away.
I'm also in favor of supporting our favorite kite retailers!
#9
Posted 25 March 2009 - 08:55 AM
End of the day, legitimate kite shops are part of kiting's backbone.
![]()
Best to support them whenever possible!
Im 100% on this! We must all support our local shop. In my case, my friend who own the local kite store ask me to check on my side for a sail only.. its the reason of this post.
Thanks for the reply, my friend will contact Ben or Lollie, like he always do anyways...
#10
Posted 27 March 2009 - 10:16 AM
Im 100% on this! We must all support our local shop. In my case, my friend who own the local kite store ask me to check on my side for a sail only.. its the reason of this post.
Thanks for the reply, my friend will contact Ben or Lollie, like he always do anyways...
does anybody no any one who does them in the uk
#11
Posted 27 March 2009 - 10:32 AM
#12
Posted 27 March 2009 - 10:06 PM

Knowledge: The small part of ignorance that we arrange and classify.
#13
Posted 28 March 2009 - 08:21 AM
I have a few 1.5s and have said I would get the next one sail only. I just ordered my next one and of course said
Denny #12

0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users














