1st Icarex REV with REV logo
The first known REV 1.5 made from Icarex with an official REV logo on it. This was collaboration between Jim Hadzicki and myself. I provided the 4 sample pieces and the complete unfinished sail cut-out from Icarex Polyester P31. They experimented with printing the logo on the samples and the final on my REV sail cut-out. It is understood that the 1st sample stuck to the logo printer. The 4th looked quite good and the final being the sail was perfect. It was returned to me where I completed the appliqué work. The leading edge is Icarex Polyester P38 mylar backing. There is no bridle. All the bungees are very light material. This may very well be the lightest polyester REV I.5 despite the appliqué.